Custom Printing

Custom Printing

Printing Procedure

Considering the high costs of billboards, custom printing on sarking is an extremely cost effective and efficient form of advertising. As a special offer, we will supply FREE custom printing for orders of 20 rolls of 60m or 40 rolls of 30m. However, the customer must pay for the plate set-up cost as outlined in the Custom Printing Charges and Terms (5).

Custom Printing Process

  1. Artwork:
    The customer supplies their logo for quotation of set-up costs. Note: All artwork MUST be supplied as ‘print ready’ PDF files to ensure your order is printed correctly.

  2. Cost:
    Charge for printing plates is based on a maximum size of 800 mm x 800 mm.
    Contact customprinting@ametalin.com for details.

  3. Order:
    The customer places an order based on the minimum order quantities outlined in the Custom Printing Charges and Terms (3).

  4. Approval:
    Artwork will be reproduced and a proof sent to the customer for review and approval. Whilst every care is taken in the preparation of final artwork, it is essential that the artwork be checked thoroughly by you or someone within your organisation to ensure accuracy. Please be sure to double-check spelling, grammar, phone numbers, web addresses and design before approving final artwork for printing.

  5. Final Product:
    Once artwork is approved, the plates will be fabricated and delivered to production
    for custom printing.

N.B.: If a proof containing errors is approved by the customer, the customer is responsible for payment of all original costs of printing, including corrections and reprints.

Terms and Conditions

One Colour Black Custom Printing Terms and Conditions on Foil

Revised May 2019

Ametalin provides custom printing on the following terms:

  1. Print Size:
    Up to a maximum area of 800mm x 800mm, with a print repeat of approximately 1040 mm

  2. Plate Set-up Cost:
    A one-off charge for the printing plate will apply for the first order only.
    Contact customprinting@ametalin.com for details.

  3. Minimum Order Quantity: 1,200 lineal metres.
    For example: 20 rolls @ 60 metres or 40 rolls @ 30 metres.

  4. Print Colour:
    Black

  5. Printing Cost:
    FREE printing is offered with minimum order quantities.

  6. Overs and Unders:
    Quantity supplied may be up to 10% more or less than quantity ordered, and may include a short roll/s (from the end of the production run). You will only be invoiced for the number of rolls shipped. Short rolls from the end of the run will be invoiced on a pro-rata basis.

  7. Turnaround:
    Please allow up to three weeks for delivery from the time the final artwork is approved. All artwork MUST be supplied as ‘print ready’ PDF files to customprinting@ametalin.com to ensure your order is printed correctly.

N.B.: In addition to any printing specified by the customer, all rolls will have a declaration of compliance to AS/NZS 4200.1 and AS/NZS 4859.1, together with a small product identifier logo.  All roof sarking products will also be supplied with a 150 mm overlap line printed on both edges of the product for ease of installation.

One Colour Black Printing Terms and Conditions on VapourTechTM

Revised May 2019

Ametalin provides custom printing on the following terms:

  1. Print Size:
    A maximum print area of 800 mm x 800 mm, with a print repeat of 1220 mm

  2. Plate Set-up Cost:
    1370 mm: A one-off charge for one printing plate will apply for the first order only.
    – 1500 mm: A one-off charge for one printing plate will apply for the first order only.
    – 2740 mm: A one-off charge for two printing plates will apply for the first order only.
    Contact customprinting@ametalin.com for further details.

  3. Minimum Order Quantity:
    1,200 lineal metres.
    For example: 40 rolls @ 30 metres.

  4. Printing Cost:
    FREE printing is offered with minimum order quantities.

  5. Overs and Unders:
    Quantity supplied may be up to 10% more or less than quantity ordered, and may include a short roll/s (from the end of the production run). You will only be invoiced for the number of rolls shipped. Short rolls from the end of the run will be invoiced on a pro-rata basis.

  6. Turnaround:
    For the first order, please allow up to eight weeks for delivery from the time the final artwork is approved and allow up to six weeks for subsequent orders. All artwork MUST be supplied as ‘print ready’ PDF files to customprinting@ametalin.com to ensure your order is printed correctly.

N.B.: In addition to any printing specified by the customer, all rolls will have a declaration of compliance to AS/NZS 4200.1 and AS/NZS 4859.1, together with a small product identifier logo.

May 2019

Ametalin provides custom printing on the following terms:

  1. Print Size:
    A maximum print area of 800 mm x 800 mm, with a print repeat of approximately 1040 mm

  2. Select your product colour:   
    Choose the product colour from the following options:
    Colours available / Minimum Order Quantity (MOQ) / Additional Cost


    – Blue    /
    1,200 lineal metres / No additional cost
    – _____ / 9,600 lineal metres / Additional Cost


  3. Minimum Order Quantity:
    1,200 lineal metres.: For example: 20 rolls @ 60 metres or 40 rolls @ 30 metres.
    9,600 lineal metres.: For example: 160 rolls @ 60 metres or 320 rolls @ 30 metres.

  4. Plate Set-up Cost:
    – 1 colour print:
    A one-off charge for one printing plate will apply for the first order only.
    – 2 colour print: A one-off charge for two printing plates will apply for the first order only.

  5. Printing Cost:
    1 x Custom Colour: Additional Cost
    2 x Custom Colours: Additional Cost

  6. Overs and Unders:
    Quantity supplied may be up to 10% more or less than quantity ordered, and may include a short roll/s (from the end of the production run). You will only be invoiced for the number of rolls shipped. Short rolls from the end of the run will be invoiced on a pro-rata basis.

  7. Turnaround:
    Please allow up to eight weeks for delivery from the time of final artwork approval.
    For custom colour weave, please allow up to twelve weeks for delivery from the time of final weave colour approval. All artwork MUST be supplied as ‘print ready’ PDF files to customprinting@ametalin.com to ensure your order is printed correctly.

N.B.: In addition to any printing specified by the customer, all rolls will have a declaration of compliance to AS/NZS 4200.1 and AS/NZS 4859.1, together with a small product identifier logo. All roof sarking products will also be supplied with a 150 mm overlap line printed on both edges of the product for ease of installation.

Coloured Custom Printing Terms and Conditions on Vapour TechTM

May 2019

Ametalin provides custom printing on the following terms:

  1. Print Size:
    A Maximum print area of 800 mm x 800 mm, with a print repeat of 1220 mm

  2. Plate Set-up Cost:
    One colour print:
    – 1370 mm:
    A one-off charge for one printing plate will apply for the first order only.
    – 1500 mm: A one-off charge for one printing plate will apply for the first order only.
    – 2740 mm: A one-off charge for two printing plates will apply for the first order only.

    Two colour print:
    – 1370 mm: A one-off charge for two printing plate will apply for the first order only.
    – 1500 mm: A one-off charge for two printing plate will apply for the first order only.
    – 2740 mm: A one-off charge for four printing plates will apply for the first order only.

  3. Minimum Order Quantity:
    1,200 lineal metres.
    For example: 40 rolls @ 30 metres.

  4. Printing Cost:
    1 x Custom Colour: Additional Cost
    2 x Custom Colours: Additional Cost

  5. Overs and Unders:
    Quantity supplied may be up to 10% more or less than quantity ordered, and may include a short roll/s (from the end of the production run). You will only be invoiced for the number of rolls shipped. Short rolls from the end of the run will be invoiced on a pro-rata basis.

  6. Turnaround:
    For custom colour printing, please allow up eight weeks for delivery from the time of final colour approval. All artwork MUST be supplied as ‘print ready’ PDF files to customprinting@ametalin.com to ensure your order is printed correctly.

N.B.: In addition to any printing specified by the customer, all rolls will have a declaration of compliance to AS/NZS 4200.1 and AS/NZS 4859.1, together with a small product identifier logo.